Pigments and fillers are essential components of architectural paint formulations. They influence color, opacity, texture, cost and other important coating properties.
However, their performance depends not only on the materials themselves but also on how they interact with the polymer binder.
For manufacturers of water-based paints, achieving good compatibility between acrylic emulsions, pigments and fillers is an important part of formulation development.
Architectural coatings commonly use several types of pigments and mineral fillers.
Titanium Dioxide (TiO2)
Titanium dioxide is widely used to provide opacity, whiteness and brightness in architectural paints.
Calcium Carbonate
Calcium carbonate is a commonly used mineral filler that helps control formulation cost, texture and other physical properties.
Talc
Talc can contribute to surface smoothness and influence the application characteristics of certain coating formulations.
Kaolin
Kaolin is used in different paint systems to adjust rheology, opacity and surface properties.
The acrylic emulsion acts as the binder, helping hold pigments and fillers together after film formation.
An unsuitable binder or poorly balanced formulation may result in:
Reduced storage stability
Poor film integrity
Lower adhesion
Uneven surface appearance
Changes in viscosity
Reduced water resistance
Selecting a suitable polymer binder helps formulators achieve the desired balance of coating properties.
Pigment Volume Concentration (PVC) represents the volume of pigments and fillers relative to the total volume of non-volatile components in a paint formulation.
PVC can influence:
Gloss level
Opacity
Porosity
Scrub resistance
Water resistance
Binder demand
The critical pigment volume concentration (CPVC) is another important concept. It represents the point at which the binder is just sufficient to fill the spaces between pigment and filler particles under the relevant theoretical assumptions.
Formulators should consider PVC and CPVC when optimizing architectural paints.
Dispersants help distribute pigments and fillers throughout the water-based paint system.
A suitable dispersant can improve pigment dispersion, reduce agglomeration and contribute to formulation stability.
However, the dosage needs to be optimized to avoid unwanted effects on water resistance and other final coating properties.
Successful paint formulation requires cooperation between the polymer binder, pigments, fillers and additives.
Laboratory evaluation should include viscosity, storage stability, film appearance, adhesion, scrub resistance and water resistance.
RUICO focuses on water-based polymer emulsions and application-oriented development for different coating requirements.
Contact our team to explore suitable acrylic emulsion solutions for your paint formulations.