Water resistance is an important performance requirement for architectural coatings, particularly exterior wall paints and coatings applied in humid environments.
A coating with insufficient water resistance may experience whitening, softening, blistering or reduced adhesion after exposure to moisture.
For paint manufacturers, improving water resistance requires attention to both polymer selection and formulation design.
The polymer binder forms the continuous film that holds pigments and fillers together.
Its chemical composition, particle structure and film-forming properties influence the final coating's resistance to water penetration.
A suitable acrylic or styrene acrylic emulsion can contribute to better film integrity and water resistance.
Proper film formation is essential for achieving good water resistance.
During drying, polymer particles need to come together and form a continuous film.
If film formation is incomplete, the coating may contain microscopic gaps or weak areas that allow water to penetrate more easily.
Important factors include:
MFFT of the polymer
Application temperature
Drying conditions
Coalescent selection
Polymer composition
Pigment volume concentration (PVC) is another important consideration.
At high PVC levels, the amount of binder may be insufficient to fully cover and bind all pigment and filler particles.
This can increase film porosity and affect water resistance.
Balancing PVC and binder content is therefore essential.
Additives also contribute to overall coating performance.
Dispersants help stabilize pigments and fillers. Defoamers control unwanted foam during production and application. Rheology modifiers help control viscosity and application properties.
The compatibility and dosage of each additive should be evaluated within the complete formulation.
Laboratory testing helps determine whether the formulation meets the intended requirements.
Common evaluations include water immersion, water spotting, film appearance, adhesion and resistance to blistering.
Test conditions should be consistent with the relevant customer specifications or applicable industry standards.
Improving water resistance is not simply a matter of increasing binder dosage. It requires a suitable combination of polymer properties, formulation design and application conditions.
RUICO develops water-based polymer emulsions for different coating applications and supports customers in exploring suitable binder solutions.