Foam coating acrylate copolymer emulsion

Foam coating is to add a foaming agent (usually a surfactant) to a higher concentration of finishing working fluid and then use foaming equipment to mix it with air. A processing technology that forms a certain quality of foam, and then uniformly applies the foam to the surface of the fabric through a foam applicator. The surface of the fabric is coated with a foam adhesive layer, and the coating film layer is used to produce flame retardant, antifouling and other properties, and the fabric has a unique style, feel and appearance, and has good air permeability and low cost.

Foam coating has many advantages, such as saving dyeing chemicals, energy saving, and reducing processing costs, and the coating is uniform, and the coating amount is easy to control; in addition, when the coating is processed on the back of the fabric, the coating is affected by tiny air bubbles. The liquid has a thickening effect, which can prevent the coating liquid from penetrating the front of the base fabric and affect the appearance of the fabric, and at the same time make the foam coated fabric have a softer feel. Single-sided or double-sided processing can be performed on heavy fabrics and surface structure fabrics.

RF-8207 is a special acrylate copolymer emulsion specially developed for durable and long-lasting foam coatings. It can be used in the foam coatings of all kinds of fabrics, including blackout curtain fabrics, furnishing and decorative textile components, hard-hand feel nonwoven fabrics, polyester wadding, etc.

• Excellent adhesion and bonding strength for synthetic fibers
• Good elastic resilience
• High stiffness, fine and smooth foam formation
• Very good hand-feel
• Non-yellowing
• Excellent wash and dry-clean resistance
• Eco-friendly, low odor
• APEO-free

Before using, determine the formulation according to the specific requirements of the coating. Add the suitable amount of foaming agent, the cross-linking agent, thickener, etc. and disperse uniformly.

After the coating is applied, heat for 2-3 minutes at the high temperature of 160-180°C.

Ruico helps you do deal with various flame retardant foam coating.

Shawn

Regional Sales Manager

Zhejiang Ruico Advanced Materials Co., Ltd. (Stock No.873233)

Add: No.188, Liangshan Road, Linghu Town, Nanxun District, Huzhou City, Zhejiang Province, China 313018

Phone: +86 (572) 2903236

Fax: +86 (572) 2905222

WhatsApp: +86 15968208672

Cellphone: +86 15968208672

Website:www.ruicoglobal.com

E-mail: [email protected]