news

Peelable Protective Gel Excellent Protection On Different Surface

Update:30-06-2020
Summary:

        RF-8888 Peelable Protective Gel is a one c […]

 

      RF-8888 Peelable Protective Gel is a one component viscous liquid. Apply the product on the surface of metal, glass, ceramic, paint, plastic, wood etc. The membrane body has the function of anti-scratch, anti-wear, anti-dust and cleaning protection. The membrane body has good solvent resistance, grease resistance, rain-water resistance. Withstand prolonged exposure to high temperatures. The membrane body has the characteristics of anti sticking in summer, no brittle in winter, no residual glue after cleaning, It is especially suitable for long-term weather resistant protection in indoor and outdoor natural environment. Typical USES such as: glass curtain wall, aluminum alloy doors and Windows, stainless steel parts, automobile transportation protection, elevator engineering, glass steel products, metal rust prevention, large construction machinery, spray booth and other resistance protection.

This product has quite good performance on below aspects:

  1. Water-based formula, non-toxic and odorless;
  2. Non-heavy metal, halogen free, SGS, RoHs standard;
  3. The protection period under natural environment can be more than two years;
  4. Can be used on the metal surface, paint surface, after the tear of the film body stripping without residual;
  5. According to 10 silk coating thickness, 1 kg can be sprayed about 15-20 square meters;
  6. Labor cost saving, especially in the special-shaped material on both sides to save the cost of raw materials;
  7. Overcome the aging resistance of traditional lamination.
  8. Shelf life of final film is above 24 months.

How to use it?

  1. This product adopts electric spraying, manual spraying, rolling spraying or wool brushcoating. Natural drying. Specific method is similar with common coatings and oil paint.
  2. It can be used after being opened;
  3. Remove grease from work piece surface and keep dry.
  4. Film formation within 1-2 hours at about 25℃ and 4-5 minutes at about 80℃;
  5. Film complete within 12 hours at about 25℃ and 6-8 minutes at about 80℃;
  6. Eachkilo of gel can be coated 8 square meters with thickness about 0.25mm.

 

 

Shawn

Regional Sales Manager

Phone: +86 (572) 2903236

WhatsApp: +86 15968208672

E-mail: shawn.shi@ruicoglobal.com

Views: 9